SY-Multi-32/LPCI COMBO

32 ports serial communication card

Anewtech Systems Industrial Serial Device SystemBase serial Card SY-Multi-32-LPCI-COMBO
  • 32 ports serial communication card and expandable 8 ports connector panels
  • Supports PCI and PCI-X Bus
  • The world’s leading 256 byte FIFO
  • Communication speed: Up to 921.6kbps
  • Auto Toggling: Automatic control of BUS I/O for RS422/RS485
  • Slew-Rate Limit Control
  • ±15kV Surge protection
Product Specification
Interface Type
SpecificationPCI Local Base Specification Rev. 2.3
Serial
InterfaceRS422/RS485(Combo)
Number of ports8 (expandable up to 32)
Maximum Speed921.6Kbps
Signal LinesRS422: TX+, TX-, RX+, RX-
RS485: TRX+, TRX-
Surge Protection15kV Surge Protection
Flow ControlXON/XOFF
Data crash preventAuto Toggling
Hardware
PCI Bus ControllerSB4002A
UARTSB16C1058
Board ConnectorDB-44P (DB44 Male)
Panel ConnectorDE-09P (DB9 Male) or DE-09S (DB9 Female)
Software
Supported OSWindows 7/8.1/10
Windows Server 2008/2012/2016
Linux
UtilityTestView
Operating Environment
Operation Temperature0 ~ 50 °C
Storing Temperature-20 ~ 80 °C
Humidity5 ~ 95% Non-Condensing
Certifications
CertificatesCE, FCC, KC

The Multi-port boards support widely used, Windows and Linux operating systems and include 15,000 volt surge suppression. The Multi-32/LPCI can be attached to 8 ports expandable panel with DE-09 (DB-9) connectors which is available in two models, RS232 and RS422/RS485. These boards are ideal for POS, hospital, factory automation and building automation and many other applications.

Connector Panel:

  • The Multi-32/LPCI consists of a low profile communication card and connector panel with support for either RS232 or RS422/RS485. Each connector panel has DE-09S (DB-9 female) connectors to protect against the pins being electrically shorted. LEDs next to each connector provide visual communication status of the ports. It is constructed of aluminium and is suitable for industrial environments.

Slew-Rate Limit Control

  • The Multi-32/LPCI is equipped with Slew Rate Limit Control and when enabled, it minimizes EMI emissions which may cause data transmission errors. When Slew Rate is used maximum communication speed is 250Kbps. This function is recommended in many medical applications.